The SSPF smart row plate filter press is a fast opening and closing plate filter press which mainly consists of the electrical control system, hydraulic control system and the main engine. When the equipment is in operation, the mechanical transmission mechanism drives the hydraulic cylinder and drags it to reach the designated position. After the hydraulic cylinder is locked by the locking device, the hydraulic cylinder protrudes and the filter plates of the filter press are pressed tightly to form a filter chamber between the adjacent filter plates, with peripheries sealed. The materials enter each filter chamber from the feeding hole through the feeding pump at a certain pressure. The solid-liquid separation is achieved by the pressure difference formed between the two sides of the filter medium by the feeding pressure of the feeding pump. After that, the materials are trapped in the filter chamber and the filtrate is discharged from the water hole of the filter plate through the filter cloth. After a period of time when the filtrate no longer flows out, the filtration and dehydration process is completed. You shall stop feeding and determine whether to perform high pressure diaphragm squeezing, washing and drying in light of the process requirements. Then the hydraulic cylinder is retracted, the locking device in unlocked, the mechanical transmission mechanism drives the hydraulic cylinder, pulls out the filter plates and removes the filter cake and the equipment will enter the next filtration cycle after the filter cloth is cleaned.