1. Widely used in solid-liquid seperation
2. Ideal equipment for sludge dewatering
3. Ring type abrasive belt is set between vacuum container and the rubber belt, water is used to airproof and lubricate which can keep stable and higher vacuum degree, good for stable operation state.
4. Rubber belt is supported by air cushion or water to reduce the resistance and is good to prolong service life of the rubber belt.
5. The whole structure adopts module design which can be consolidated freely, convenient for transportation and installation.
6. Vacuum balance automatic discharging tank or steam-liquid separator is set to carry out zero potential difference automatic discharging or high potential difference discharging to satisfy requirements from different working states
7. The control system uses PLC technology to carry out PID regulation, provide safety guarantee of running and supervision of the procedure.
advantage and characteristics of belt press:
1.continuous and fully automatic operation
2.high reduction of sludge volume for saving of transport cost
3.high dewatering performance due to the convenient arrangement of the rollers
4.using the laste advantage technology, add one more independent concentrated device based on normal type belt press, significantly increased the ability of water removal
5.8-15% lower flocculation consumption with comination of dynamic and static flocculation reactor.
data of DZU belt filter press machine:
| ||4|| ||8000||12200|| || ||6.5||14|
| ||5|| ||10000||14200|| || ||7||16|
| ||6|| ||12000||16200|| || ||7.6||20|
| ||6|| ||10000||14200|| || ||7.5||20|
| ||7.2|| ||12000||16200|| || ||8.2||22|
| ||8.4|| ||14000||18200|| || ||9.1||26|