Rubber belt type vacuum filter takes filter cloth as filter medium, adopt material gravity and vacuum suction to separate solid and liquid materials. It is adopted ring rubber belt as a vacuum chamber. The vacuum chamber continuously running by motor, filter cloth are layup to the rubber belt and running along with the belt, the rubber belt with friction belt create a water-tight seal. Slurry are distributed on filter cloth by distributing device When the vacuum chamber is switched on vacuum system, it will create a vacuum area on rubber belt, Filtrate liquor pass through filter cloth by horizontal grooves on rubber belt, then get together and go into the vacuum chamber by micro pore, Solid powder are holding on filter cloth, then create a filter cake. The liquid which have got into vacuum chamber be discharged by steam-water separator. Move along with the rubber belt, preformed filter cake get into washing section and suck dry section. Finale filter cloth and rubber belt are divided, the filter cake is discharged from discharging roller. The filter cloth which discharge filter cake are washed, then can be re-used, re-access to filtrate area by a set of supportive rollers and rectify device, begging a new cycle.
1. Modularized design: easy installation and transportation.
2. High auto degrees: Consecutive auto feeding, filtering, washing, dewatering, discharging, cloth cleaning improves production efficiency.
3. Convenient filter technology: cake thickness, water washing, counter current decantation stages, vacuum degree, filter speed can be adjusted for optimistic effect.
4. Fine decantation effect: even and thorough multi-stage advection or counter current decantation makes collection and reuse of mother liquor and washing liquor separately.
5. Operation:continuous, and fully automatic operation, filtration speed with frequency control.
6. Control system: PLC program fully automatic-controlled system , DCS remote interface to realize remote monitoring and operation
7. The frame: made of high quality seamless square steel pipe with sandblast and high strength fluorin-carbon finish, makes anticorrosive ability keep more than 8 years.
8. Rubber belt: supported by air cushion or water to reduce the resistance and is good to prolong service life of the rubber belt.
9. High quality bearing: with full airproof bearing seat, available to run more than 3 years.
10. Extrusion and transmission rollers: made of seamless steel pipe with anti-wearing rubber outside, valid to work more than 5 years.
11. The main body are made of stainless steel, including vacuum box, fender, flume, waterproof cover, muzzle and sheets, etc.