Tailings Rubber Belt Vacuum Filter Press

Tailings Rubber Belt Vacuum Filter Press

Vacuum belt filter press for treating tailings , foodstuff, sludge Specifications: 1. Widely used in solid-liquid seperation 2. Ideal equipment for sludge dewatering 3. Ring type abrasive belt is set between vacuum container and the rubber belt, water is used to airproof and lubricate which can...
Chat Now

Product Details

Vacuum belt filter press for treating tailings , foodstuff, sludge


Specifications:
1. Widely used in solid-liquid seperation
2. Ideal equipment for sludge dewatering
3. Ring type abrasive belt is set between vacuum container and the rubber belt, water is used to airproof and lubricate which can keep stable and higher vacuum degree, good for stable operation state.

4. Rubber belt is supported by air cushion or water to reduce the resistance and is good to prolong service life of the rubber belt.
5. The whole structure adopts module design which can be consolidated freely, convenient for transportation and installation.
6. Vacuum balance automatic discharging tank or steam-liquid separator is set to carry out zero potential difference automatic discharging or high potential difference discharging to satisfy requirements from different working states
7. The control system uses PLC technology to carry out PID regulation, provide safety guarantee of running and supervision of the procedure.

working principle:

The belt filter press is a continuous-feed dewatering device that applies chemical conditioning, gravity draining, and mechanical pressure to dewater sludge. Rubber belt type vacuum filter takes filter bag as filter medium, adopt material gravity and vacuum suction to separate solid and liquid materials. It is adopted ring rubber belt as a vacuum chamber. The vacuum chamber continuously running by motor, filter cloth are layup to the rubber belt and running along with the belt, the rubber belt with friction belt create a water-tight seal. Slurry are distributed on filter cloth by distributing device When the vacuum chamber is switched on vacuum system, it will create a vacuum area on rubber belt, Filtrate liquor pass through filter cloth by horizontal grooves on rubber belt, then get together and go into the vacuum chamber by micro pore, Solid powder are holding on filter cloth, then create a filter cake.

The liquid which have got into vacuum chamber be discharged by steam-water separator. Move along with the rubber belt, preformed filter cake get into washing section and suck dry section. Finale filter cloth and rubber belt are divided, the filter cake are discharged from discharging roller. The filter cloth which discharge filter cake are washed, then can be re-used, re-access to filtrate area by a sets of supportive roller and rectify device, begging a new cycle.

Advantages and characteristics of belt press:
1. Continuous and fully automatic operation
2. High reduction of sludge volume for saving of transport cost
3. High dewatering performance due to an conveniant arrangement of the rollers
4. Using the latest advanced technology, add one more independent concentrated device based on normal type belt press, significantly increased the ability of water removal.
5. 8-15% lower flocculation consumption with combination of dynamic and static flocculation reactor.

6. High working capacity(150% of normal type), low moisture content of filter cake(10% less than normal type), low working cost(30% lower than normal type)
7. The frame is made of high quality seamless square steel pipe(10#-12#) with sandblast and high strengh fluorin-carbon finish, makes anticorrosive ability keep more than 8 years.
8. The main body are made of stainless steel(304), including main and assistant rollers, fender, flume, waterproof cover, muzzle and sheets, etc.
9. High quality bearing with full airproof bearing seat, available to run more than 3 years.
10. Extrusion and transmission rollers are made of seamless steel pipe with anti-wearing rubber outside, vailable to work more than 5 years.

ModelFilter
area
Effective
width of
  filter belt
Effective
length of
  filter belt
Total
length
Total
width
Total
height
WeightVacuum
consumption
m 2mmmmmmmmmmtm 3 /min
500350060001020012502070612
48000122006.514
51000014200716
612000162007.620
6004.8600800012200135020706.816
610000142007.520
7.212000162008.222
8.414000182009.126
100081000800012200175020708.826
1010000142009.628
12120001620010.430
14140001820011.132
130010.41300800012200205020709.828
13100001420010.830
15.6120001620011.535
18.2140001820013.238
20.8160002020015.140

                         

Inquiry